Infrared technology based automatic motion sensor switch.
Automatic turn ON/OFF while detected people come or left.
Automatic off in day time to save energy
Switch start to work at night or in darkness
After the switch is turned on, if a person or object enters the sensing range, the light will be auto power on
If the person leaves the sensor range, the light will keep on for 30s. After 30s, it will auto power off
By adjusting the delay time of the switch resistance set the time. Usually about 30 seconds
Easy to install or replace existing switch
Disconnect the power supply during installation to ensure safety
Prohibit the use of more than power range
Can not be installed to water pour location
Detection range with changes in ambient temperature. Summer detection distance is relatively short, Winter detection distance farther.
Can not be installed at the location below -20 degrees and above 60 degrees
Do not place in direct sunlight
Not recommended to be installed in a position of moving objects
Voltage: AC 180V-240V
energy saving lamp≤200W LED Lamp≤ 120W
Induction distance: 3-8 m
Induction angle: 120°
Light intensity of illumination: 6 Lux
Time extension: 30s±10s
Switch Size: 6.4×3.6×2.6cm/2.52×1.42×1.02inch
1 x Sensor Light Switch